Skip to content
Marlbridge

Practice Questions

Cambridge O Level Geography (2217): Industry – Practice Questions

Original exam-style questions with mark-scheme answers on the industrial system, industry types and factory location factors for Cambridge O Level Geography 2217.

Subject
Geography
Level
O LEVELS
Topic
Theme 3 – Economic Development
Updated

Aligned to Cambridge O Level Geography (2217), 2026 (Version 3). Official specification .

Syllabus page (what it covers and how it is assessed): Cambridge O Level Geography.

Syllabus points this page covers

2217

  • 3.3 Industry

Found an error? Report a correction.

These are original practice questions written in the style of Cambridge O Level Geography (2217) assessment objectives. They are not taken from any past paper and are not endorsed by Cambridge International. Site data are illustrative; use your own learned case study where a question asks for a named example.

Use these questions alongside the industry study guide and the industry revision notes.

Section A

1. Name the four types of industry identified in the syllabus. [2]

2. For a factory, give one example of each: (a) an input, (b) a process, (c) a waste output. [3]

3. State what is meant by a footloose industry. [1]

4. Give two political factors that can attract a factory to an area. [2]

5. Explain why a soft-drink bottling plant is usually located near its market. [2]

Section B

6. A company plans a new electronics assembly plant. The table gives information about three possible sites (illustrative data).

Site Mean monthly wage (US$) Distance to container port (km) Government incentive
P 900 25 None
Q 300 40 Five-year tax break in export processing zone
R 250 600 None

(a) Calculate how many times higher the wage is at P than at Q. [1] (b) Recommend the best site and justify your choice using the data. [4] (c) Suggest one disadvantage for local people of a factory moving into an export processing zone. [2]

7. Many iron and steel works built in the 19th century were on coalfields, but newer steel works are often at coastal sites.

(a) Explain why early steel works were located on coalfields. [2] (b) Suggest two reasons why newer steel works are located at the coast. [4]

8. Explain why high-technology industries often cluster near universities. [4]

9. Describe how the waste outputs of an industrial system can harm the environment. [4]

10. For a named factory or industrial zone, explain the factors that have influenced its location. [7]


Answers

1. Manufacturing, processing, assembly, high technology (all four for 2 marks; two or three for 1 mark) [2].

2. (a) Any input, such as raw materials, components, labour, energy or capital [1]. (b) Any process, such as smelting, refining, assembling or packaging [1]. (c) Any waste, such as waste gases, waste water, heat or scrap [1].

3. An industry that is not tied to raw materials or a particular power source, so it can locate almost anywhere [1].

4. Any two [2]: grants or subsidies; tax breaks; cheap land or rent; planning permission; location in an export processing zone or special economic zone; trade barriers that encourage production inside the market.

5. The product is mostly water, so it gains weight and bulk in production [1]; transporting the finished drinks is costly, so it is cheaper to make them close to the customers [1].

6. (a) 900 ÷ 300 = 3 times [1]. (b) Site Q [1]. Up to 3 further marks: wages at Q are a third of those at P (300 compared with 900 US dollars), which matters because assembly needs many workers [1]; Q is only 40 km from a container port, so components can be imported and products exported cheaply, whereas R is 600 km away [1]; the five-year tax break in the export processing zone reduces costs further [1]. R’s wages are slightly lower but the distance from the port outweighs this. (c) Any one, developed [2]: wages may be low and working conditions poor; profits may go to the foreign company rather than the local area; jobs could disappear when the tax break ends and the company moves; farmland may be lost to the zone; pollution may increase.

7. (a) Coal was the main fuel for smelting iron ore, and large quantities were used [1]; coal is heavy and bulky, so locating on the coalfield reduced transport costs [1]. (b) Any two, developed, 2 marks each [4]: local coal and iron ore have run out or become expensive, so raw materials are now imported by sea [2]; a coastal port is a break-of-bulk point, so ore and coal can be unloaded straight into the works [2]; flat coastal land gives space for large modern plants [2]; finished steel can be exported directly [2].

8. Up to 4 marks: universities supply highly qualified graduates [1]; research carried out in universities can be developed into new products by firms [1]; staff and students may set up new companies, often in nearby science parks [1]; clustering allows firms to share ideas, suppliers and skilled workers (agglomeration) [1].

9. Up to 4 marks: waste gases such as sulphur dioxide and carbon dioxide cause air pollution and add to the enhanced greenhouse effect [1]; untreated waste water discharged into rivers harms aquatic life and contaminates drinking water [1]; solid waste and scrap dumped on land can contaminate soil and spoil the landscape (visual pollution) [1]; heat released into rivers lowers oxygen levels, harming fish [1]; noise from machinery and traffic disturbs nearby residents [1].

10. Levels-style marking. Level 1 (1–3 marks): simple factors with no named place. Level 2 (4–5 marks): a named factory or zone with some factors developed. Level 3 (6–7 marks): a named factory or zone with several factors explained using place-specific detail. Indicative content (Silicon Valley): southern San Francisco Bay Area, including Palo Alto, Mountain View, Cupertino, Santa Clara and San Jose; Stanford University supplies graduates and research; venture capital funds start-ups; agglomeration of firms such as Intel, Apple and Google allows the sharing of ideas and skilled staff; airports at San Francisco and San Jose suit light, high-value products; a pleasant climate attracts workers.

A note on exam technique for this subtopic

Always tie a location factor to the type of industry: “near the market because the product gains weight” earns the mark, “near the market” alone often does not. In decision-making questions, quote the data and explain why the rejected sites are worse.

Get free revision emails (optional)

Occasional emails with practice questions, worked explanations and links to free resources for the qualification and subjects you choose. No spam, and you can unsubscribe from any email. The free tools on this site never need an email.

Subjects (optional, up to 6)

Choose a qualification to see its subjects.

Related resources

Related articles

Studying this with a teacher

Working through Geography O LEVELS?

This page is free and stays free. Marlbridge is not offering Geography classes at the moment, so there is no tuition to book for it. The free study resources stay open to everyone.