Skip to content
Marlbridge

Practice Questions

AQA A-level Biology: Transport Across Cell Membranes and Required Practicals 3 and 4 (7402) – Practice Questions

Original questions with worked answers on AQA A-level Biology 3.2.3: fluid mosaic, diffusion, water potential, active transport, co-transport, practicals 3-4.

Subject
Biology
Level
A LEVEL (AS CONTENT)
Topic
Transport Across Cell Membranes and Required Practicals 3 and 4
Updated

Aligned to AQA A Level Biology (7402), For first teaching 2015. Official specification .

Syllabus page (what it covers and how it is assessed): AQA A Level Biology.

Syllabus points this page covers

7402 (AS content of the A Level)

  • 3.2.3 Transport across cell membranes

Found an error? Report a correction.

Need help with this topic? Request a free trial class for A Level Biology (7402).

These are original questions written for Marlbridge, for revision and practice on this content. They are not reproduced past-paper questions, and they do not replicate the exam’s exact structure, question count or mark tariffs – examination boards hold copyright in their own papers. Use these alongside the official past papers from your board or school.

These questions are aligned to section 3.2.3, Transport across cell membranes, in the AQA AS and A-level Biology specification (A-level 7402), for first teaching 2015, exams June 2016 onwards. The section is AS content. Questions 8 to 11 are based on required practicals 3 and 4 and use MS 3.2 and MS 3.4 (plotting data and using an intercept). Every answer shows the working and the marking points.

Related: Transport across cell membranes study guide and revision notes. Course hub: AQA A-level Biology.

How should you use these questions?

Answer each question fully before checking. In osmosis answers, always use the term water potential and say which value is higher or lower. In practical questions, name the measuring instrument and the controlled variables.

Questions

1. Describe the fluid-mosaic model of membrane structure. [4]

2. Explain the role of cholesterol in cell membranes. [1]

3. Explain why oxygen can cross a membrane by simple diffusion, but glucose cannot. [2]

4. Compare facilitated diffusion and active transport. [3]

5. Three plant cells are arranged in a row: cell X (-450 kPa), cell Y (-620 kPa) and cell Z (-380 kPa).

(a) Which cell has the highest water potential? [1] (b) Describe the net movement of water between the cells. [2]

6. Describe how sodium ions and glucose are absorbed by epithelial cells in the mammalian ileum, and how glucose reaches the blood. [5]

7. Epithelial cells of the ileum have microvilli and many mitochondria. Explain how each adaptation increases the rate of absorption. [3]

8. A student needs 20 cm cubed of each of these sucrose solutions, made from a 1.0 mol dm-3 stock solution: 0.25, 0.50 and 0.75 mol dm-3. Give the volumes of stock and of distilled water for each. [2]

9. The student placed potato cylinders in sucrose solutions for 24 hours.

Sucrose (mol dm-3) Initial mass (g) Final mass (g)
0.0 1.60 1.84
0.2 1.55 1.67
0.4 1.62 1.58
0.6 1.58 1.45

(a) Calculate the percentage change in mass for the 0.0 and 0.4 mol dm-3 cylinders. [2] (b) Explain why percentage change in mass is calculated rather than change in mass. [1] (c) Explain how the student would use a graph of these results, and a calibration curve, to find the water potential of the potato tissue. [3] (d) Explain why the cylinders were blotted before weighing. [1]

10. A student investigated the effect of temperature on the permeability of beetroot cell membranes, measuring the absorbance of the surrounding water with a colorimeter.

(a) Explain why the beetroot pieces were washed before the experiment. [1] (b) Give two variables that should be kept the same. [2] (c) Absorbance rose slowly from 20 to 50 degrees Celsius and sharply above 50 degrees Celsius. Explain these results. [3]

11. Suggest why the rate of glucose uptake by facilitated diffusion stops rising at high glucose concentrations, although the rate of oxygen uptake by simple diffusion keeps rising. [2]

12. Red blood cells were placed in a solution with a water potential lower than that of the cells. Describe and explain what happens to them. [2]

Answers

1. Any four [1 each]: phospholipid bilayer with hydrophilic heads facing outwards and hydrophobic tails inwards; proteins scattered through the bilayer (mosaic), some spanning it (channel / carrier proteins); phospholipids and proteins can move sideways (fluid); glycoproteins and glycolipids with carbohydrate chains on the outer surface; cholesterol between phospholipids.

2. It restricts the movement of other molecules in the membrane (makes it less fluid / more stable) [1].

3. Oxygen is small and non-polar, so it passes through the hydrophobic core of the bilayer [1]. Glucose is polar / water-soluble (and larger), so it cannot pass through the hydrophobic tails and needs a carrier protein [1].

4. Both use carrier proteins [1]. Facilitated diffusion is down a concentration gradient and is passive (no ATP), whereas active transport is against a concentration gradient [1] and uses energy from the hydrolysis of ATP [1].

5. (a) Cell Z (-380 kPa) [1]. (b) Water moves from Z to X and from Z to Y [1], and from X to Y; Y has the lowest (most negative) water potential, so it gains water from both [1].

6. Sodium ions are actively transported out of the epithelial cell into the blood [1], using ATP [1], keeping a low concentration of sodium ions inside the cell [1]. Sodium ions diffuse into the cell from the lumen through a co-transporter protein, carrying glucose with them against glucose’s concentration gradient [1]. Glucose moves out of the cell into the blood by facilitated diffusion [1].

7. Microvilli increase the surface area of the cell-surface membrane [1], providing more space for carrier and co-transporter proteins, so more absorption at once [1]. Many mitochondria release ATP by respiration for active transport of sodium ions [1].

8. [2 marks for all three correct; 1 mark for two]

  • 0.25: 5 cm cubed stock + 15 cm cubed water.
  • 0.50: 10 cm cubed stock + 10 cm cubed water.
  • 0.75: 15 cm cubed stock + 5 cm cubed water.

9. (a) 0.0: (1.84 - 1.60) / 1.60 x 100 = +15% [1]. 0.4: (1.58 - 1.62) / 1.62 x 100 = -2.5% (-2.47) [1]. (b) The cylinders had different starting masses, so percentage change allows a fair comparison [1]. (c) Plot percentage change in mass against sucrose concentration and draw a line of best fit [1]; read the concentration where the line crosses zero change (where there is no net osmosis) [1]; use the calibration curve to convert this concentration to a water potential, which equals that of the tissue [1]. (d) To remove surface solution, which would add to the mass and is not water inside the tissue [1].

10. (a) To remove pigment released from cells damaged when cutting [1]. (b) Any two [1 each]: size / surface area of the beetroot pieces; volume of water; time in the water bath; source of beetroot. (c) Between 20 and 50 degrees Celsius, phospholipids gain kinetic energy and move more, so the membrane becomes more permeable and some pigment leaks [1]. Above 50 degrees Celsius membrane proteins denature [1], leaving gaps in the membrane, so much more pigment leaks out and absorbance rises sharply [1].

11. Facilitated diffusion depends on a limited number of carrier proteins, which become saturated [1]. Oxygen diffuses through the phospholipid bilayer, so the rate depends only on the concentration gradient [1].

12. Water leaves the cells by osmosis, from higher to lower water potential [1], so the cells shrink / become crenated [1].

Where marks are usually lost

  • Using “concentration of water” instead of water potential.
  • Reading -620 kPa as higher than -450 kPa.
  • Saying glucose is co-transported out of the cell into the blood (it leaves by facilitated diffusion).
  • Leaving out ATP hydrolysis when explaining active transport.
  • Missing the sign of a percentage change.

Frequently asked questions

Do I need to know the names of the transport proteins in the ileum? No. The specification only requires the sequence: active transport of sodium out, co-transport of sodium and glucose in, facilitated diffusion of glucose into the blood.

What does the calibration curve add in practical 3? The graph gives the sucrose concentration at which there is no change in mass. The calibration curve converts that concentration into a water potential in kPa.

Can I use ethanol instead of temperature in practical 4? Yes. The specification says “a named variable”. Ethanol concentration is a common choice; it dissolves membrane lipids.

Official syllabus

AQA AS and A-level Biology (7401/7402) specification, Version 1.5, section 3.2.3 Transport across cell membranes, including required practicals 3 and 4.

Get free revision emails (optional)

Occasional emails with practice questions, worked explanations and links to free resources for the qualification and subjects you choose. No spam, and you can unsubscribe from any email. The free tools on this site never need an email.

Subjects (optional, up to 6)

Choose a qualification to see its subjects.

Related resources

Related articles

Studying this with a teacher

Working through Biology A LEVEL (AS CONTENT)?

This page is free and stays free. If you would rather be taught it, Marlbridge runs Biology classes one-to-one and in small groups of up to 15, online in your own time zone. The first trial class is free. WhatsApp replies within an hour (8am–11pm Pakistan time, every day); email the same day.