Skip to content
Marlbridge

Practice Questions

OCR A Level Biology A: Enzymes (H420) – Practice Questions

Original OCR A Level Biology A (H420) 2.1.4 questions with answers: induced fit, temperature and pH, temperature coefficient, serial dilutions and inhibitors.

Subject
Biology
Level
A LEVELS
Topic
Enzymes
Updated

Aligned to OCR A Level Biology (H420), Version 4.1 (April 2026), for first assessment in 2025. Official specification .

Syllabus page (what it covers and how it is assessed): OCR A Level Biology.

Syllabus points this page covers

H420

  • 2.1.4 Enzymes

Found an error? Report a correction.

Need help with this topic? Request a free trial class for A Level Biology (H420).

These are original questions written for Marlbridge, for revision and practice on this content. They are not reproduced past-paper questions, and they do not replicate the exam’s exact structure, question count or mark tariffs – examination boards hold copyright in their own papers. Use these alongside the official past papers from your board or school.

These questions cover learning outcomes 2.1.4(a) to (f) of the OCR A Level Biology A specification (H420), Version 4.1 (April 2026), first assessment 2025, including the PAG4 practical work. Questions 6 to 9 use the mathematical skills the specification links to this section (ratios, rates, tangents and serial dilutions). Every answer gives the marking points.

Related: Enzymes study guide and enzymes revision notes. Course hub: OCR A Level Biology.

How should you use these questions?

Answer each question fully before checking. OCR mark schemes reward precise terms: tertiary structure, complementary, enzyme-substrate complex, denatured, allosteric site.

Questions

1. Catalase and amylase are both enzymes. State which catalyses an intracellular reaction and which an extracellular reaction, and give the reaction each catalyses. [2]

2. Describe the induced-fit hypothesis of enzyme action. [3]

3. Explain why an enzyme is specific to one substrate. [2]

4. Explain why the rate of an enzyme-controlled reaction increases from 10 to 35 degrees Celsius and then falls sharply above 45 degrees Celsius. [4]

5. Explain how a change of pH away from the optimum reduces the activity of an enzyme. [3]

6. The rate of a reaction catalysed by an enzyme was 3.6 units at 25 degrees Celsius and 6.3 units at 35 degrees Celsius.

(a) Calculate the temperature coefficient (Q₁₀) for this temperature range. [1] (b) At 55 degrees Celsius the rate was 1.2 units and at 45 degrees Celsius 4.8 units. Calculate Q₁₀ for this range and explain the value. [2]

7. A student prepares a tenfold serial dilution of a 2.0% amylase solution to produce four concentrations, including the starting solution. Each tube must contain 10 cm cubed.

(a) List the concentrations produced. [1] (b) Describe how the student makes the second solution. [2]

8. In a catalase experiment, the volume of oxygen collected was recorded.

Time (s) 0 20 40 60 80 100
Oxygen (cm cubed) 0 14 25 32 36 37

(a) Calculate the mean rate of oxygen production in the first 20 s. [1] (b) Explain why the rate decreases over time. [2] (c) Explain why the initial rate is used to compare different hydrogen peroxide concentrations. [1] (d) Give two variables the student should control, and how. [2]

9. Using starch and amylase, a student timed how long it took until a sample no longer turned iodine solution blue-black. At pH 7 the time was 50 s. Calculate the relative rate (1 / time). [1]

10. Amylase from saliva works much more slowly if chloride ions are removed. Explain why. [2]

11. Explain what a coenzyme is and how organisms obtain many coenzymes. [2]

12. Compare the effects of a competitive and a non-competitive inhibitor on the rate of an enzyme-controlled reaction as substrate concentration is increased. [4]

13. A poison binds to an enzyme by covalent bonds. Explain why its effect is described as non-reversible. [2]

14. In a metabolic pathway, substance D (the end product) inhibits enzyme 1, which converts A to B. Explain the advantage of this to the cell. [3]

Answers

1. Catalase is intracellular: it breaks down hydrogen peroxide into water and oxygen [1]. Amylase is extracellular: it hydrolyses starch into maltose [1].

2. The active site is not exactly complementary to the substrate at first [1]; as the substrate binds, the active site changes shape to fit more closely [1]; this puts strain on bonds in the substrate, lowering the activation energy [1].

3. The enzyme has a specific tertiary structure, so the active site has a specific shape [1] which is complementary to only one substrate, so only that substrate can bind / form an enzyme-substrate complex [1].

4. 10 to 35 degrees Celsius: molecules gain kinetic energy [1], so there are more frequent successful collisions and more enzyme-substrate complexes form [1]. Above 45 degrees Celsius: vibrations break hydrogen and ionic bonds in the tertiary structure [1], so the active site changes shape, substrate can no longer bind and the enzyme is denatured [1].

5. Hydrogen ions (or hydroxide ions) interact with charged R groups [1], disrupting ionic and hydrogen bonds [1], so the shape / charge of the active site changes and fewer enzyme-substrate complexes form [1].

6. (a) 6.3 / 3.6 = 1.75 [1]. (b) 1.2 / 4.8 = 0.25 [1]; the value is less than 1 because the enzyme is being denatured, so the rate falls as temperature rises [1].

7. (a) 2.0%, 0.2%, 0.02%, 0.002% [1]. (b) Take 1 cm cubed of the 2.0% solution [1] and add 9 cm cubed of distilled water (or buffer), then mix [1].

8. (a) 14 / 20 = 0.7 cm cubed per second [1]. (b) Hydrogen peroxide (substrate) is used up, so its concentration falls [1], so there are fewer collisions and fewer enzyme-substrate complexes form per second [1]. (c) At the start the substrate concentration is known and has not yet been reduced / the reaction is not limited by substrate being used up, so it is a fair comparison [1]. (d) Any two, with method [1 each]: temperature, using a thermostatically controlled water bath; pH, using a buffer; volume and concentration of enzyme (same mass of yeast or potato); volume of hydrogen peroxide.

9. 1 / 50 = 0.02 per second [1].

10. Chloride ions are a cofactor for amylase [1]; they help the active site take the correct shape / help enzyme-substrate complexes form, so without them fewer complexes form [1].

11. A small organic (non-protein) molecule that helps an enzyme work by carrying atoms or groups between reactions [1]; many are made from vitamins obtained in the diet [1].

12. Competitive: the inhibitor competes with substrate for the active site [1]; as substrate concentration rises, the substrate outcompetes the inhibitor and the rate approaches the uninhibited maximum [1]. Non-competitive: the inhibitor binds an allosteric site and changes the active site’s shape [1]; increasing substrate has no effect on this, so the maximum rate stays lower [1].

13. Covalent bonds are strong and do not break easily [1], so the inhibitor cannot leave and the enzyme is permanently inactivated [1].

14. When D builds up, it inhibits enzyme 1, so less A is converted and less D is made [1]. When D is used up, inhibition is removed and production resumes [1]. This regulates the amount of product / stops resources and energy being wasted making product that is not needed [1].

Where marks are usually lost

  • Calculating the temperature coefficient upside down (lower rate divided by higher rate).
  • Describing the active site as “the same shape” as the substrate.
  • Saying enzymes die at high temperature.
  • Saying a non-competitive inhibitor binds the active site.
  • Taking the rate from the flat part of a curve instead of the start.

Frequently asked questions

What value of the temperature coefficient should I expect? For many enzyme-controlled reactions below the optimum the value is about 2. Above the optimum it falls below 1.

How do I find an initial rate from a curve? Draw a tangent to the curve at time zero and calculate its gradient (change in y / change in x).

What does a boiled enzyme control show? That the reaction depends on active enzyme; if a reaction still happens, something else is causing it.

Official syllabus

OCR A Level Biology A (H420) specification, Version 4.1 (April 2026), Module 2, section 2.1.4 Enzymes, learning outcomes (a) to (f), with PAG4.

Get free revision emails (optional)

Occasional emails with practice questions, worked explanations and links to free resources for the qualification and subjects you choose. No spam, and you can unsubscribe from any email. The free tools on this site never need an email.

Subjects (optional, up to 6)

Choose a qualification to see its subjects.

Related resources

Related articles

Studying this with a teacher

Working through Biology A LEVELS?

This page is free and stays free. If you would rather be taught it, Marlbridge runs Biology classes one-to-one, online in your own time zone. One-to-one only for this course: Rs 6,000 per class in Pakistan, with other currencies on the fees page. The first trial class is free. WhatsApp replies within an hour (8am–11pm Pakistan time, every day); email the same day.